Thingiverse
DCDC_case
2
Descargas
2
Likes
0
Makes
This is a case for a DC/DC. This piece can be use with an other of my desing (Adapter) as you can view on my pictures.
Links :
Adapter (1) : https://www.thingiverse.com/thing:3776710
DCDC board (1) : https://www.dfrobot.com/product-752.html
Terminal block (6) : https://www.amazon.ca/100-pcs-Pole-Mount-bornier-300/dp/B07D71JNQD/ref=sr_1_14?__mk_fr_CA=%C3%85M%C3%85%C5%BD%C3%95%C3%91&keywords=Terminal+block&qid=1564367569&s=gateway&sr=8-14
1.To fix adapter on the case, you will need 4 screws M5 with nuts. You juste have to encase the adapter at the back of the case and screw by the case.
2. Make wires to be plug into the board and able to be weld to the terminal block.
3. Put terminals blocks in the holes at the top and at the bottom. After that, weld the wires to the terminals blocks.
4. Fix the board in the case with M3 screws and plug the wires to the board.
5. Put the cover on the case and you have à nice DCDC case.
Note : I am not reponsable any probleme
Links :
Adapter (1) : https://www.thingiverse.com/thing:3776710
DCDC board (1) : https://www.dfrobot.com/product-752.html
Terminal block (6) : https://www.amazon.ca/100-pcs-Pole-Mount-bornier-300/dp/B07D71JNQD/ref=sr_1_14?__mk_fr_CA=%C3%85M%C3%85%C5%BD%C3%95%C3%91&keywords=Terminal+block&qid=1564367569&s=gateway&sr=8-14
1.To fix adapter on the case, you will need 4 screws M5 with nuts. You juste have to encase the adapter at the back of the case and screw by the case.
2. Make wires to be plug into the board and able to be weld to the terminal block.
3. Put terminals blocks in the holes at the top and at the bottom. After that, weld the wires to the terminals blocks.
4. Fix the board in the case with M3 screws and plug the wires to the board.
5. Put the cover on the case and you have à nice DCDC case.
Note : I am not reponsable any probleme
¿Has impreso este modelo? Inicia sesión y comparte tu make.
Inicia sesión para dejar un comentario
Iniciar sesiónAún no hay comentarios – ¡sé el primero!
