Dead End

Picture source: Skull-Tastic Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 150x150mm in size.  You can only modify the X and Y dimensions. Do not adjust the height (Z) in your slicer! The layers would not be correct. The Max allowed Thickness is 2.16mm and the Actual Thickness is 2.16mm Filaments Used: PLA PolyLite Black Transmission Distance: 0.3 PLA Sunlu Meta Grey Transmission Distance: 3.5 PLA Elegoo Basic White Transmission Distance: 7 This print uses 3 unique filaments Swap Instructions: Start with Black At layer #8 (0.72mm) swap to Grey At layer #12 (1.04mm) swap to White for the rest.