Deadpool - Hueforge

Original artworkHueforge of Deadpool The photos shows the result in 200*150mm and a nozzle of 0.4You can change the X and Y dimensions but do not change the Z dimensions You must define the printing parameters indicated in the description below and change the filament on the indicated layers. You can use filaments other than those indicated, but the result will differ. You can use any black PLAPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 150.23x200mm in size You may print at higher layer heights below the Base Thickness of 0.48mm The Max allowed Thickness is 2.4mm and the Actual Thickness is 1.92mm Filaments Used: #000000 PLA Creality hyper Noir Transmission Distance: 0.2 #ffffff PLA Creality hyper White Transmission Distance: 6.9 #c10915 PLA Creality hyper Red Transmission Distance: 3.9 This print uses 3 unique filaments Swap Instructions: Start with Creality hyper Noir At layer #6 (0.56mm) swap to Creality hyper White At layer #15 (1.28mm) swap to Creality hyper Red for the rest.