Deadpool HueForge MultiColor

Deadpool HueForge Can be printed at 200mmx200mm or 100mmx100mmDo not change Z HeightPrinted with a border so that it can be resin filled Mouse Ears added for corner stability and adhesion for the long print. They should snap or flush cut off with ease. Do not change wall count. You will see that the mouse ears and hueforge itself have different wall counts. This is by design. Look out for more of my HueForge collections being uploaded. This profile also uses my optimized GCode. It is recommended to prewarm bed to 65C then start the print. I wipe my bed with 91% ISO prior to each print and I rarely, if ever, have adhesion issues. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.08mmThe Model is 200x200mm or 100x100mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 3mm and the Actual Depth is 3.1mmFilaments Used: PLA BambuLab Basic Jade White Transmission Distance: 6.3 PLA BambuLab Matte Scarlet Red Transmission Distance