Deadpool Hueforge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 112.5x200mm in sizeYou may print at higher layer heights below the Base Thickness of 0.48mmThe Max allowed Thickness is 2.4mm and the Actual Thickness is 1.68mm #000000 PLA BambuLab Basic Black Transmission Distance: 0.6 #545454 PLA BambuLab Basic Dark Gray Transmission Distance: 0.6 #9d2235 PLA BambuLab Basic Maroon Red Transmission Distance: 1.6 #ffffff PLA BambuLab Basic Jade White Transmission Distance: 5This print uses 4 unique filamentsSwap Instructions: Start with Black At layer #10 (0.88mm) swap to Dark Gray At layer #11 (0.96mm) swap to Maroon RedBorder Only Colors from here until the end. At layer #16 (1.36mm) swap to Jade White for the rest