Deadpool Hueforge

I created a stand that will work great as well:https://makerworld.com/en/models/1025425#profileId-1007499 2 versions included. “1” and “1b”. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmIf changing size . . . only change X and Y, not Z. The Model is 156.8x235.2mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 1.8mm Filaments Used:PLA Bambulab Basic Black Transmission Distance: 0.3PLA BambuLab Basic Red Transmission Distance: 4PLA Gray Transmission Distance: 3PLA White Transmission Distance: 6This print uses 4 unique filaments Swap Instructions:Start with BlackAt layer #8 (0.72mm) swap to RedAt layer #13 (1.12mm) swap to GrayAt layer #17 (1.44mm) swap to White for the rest. Project: Deadpool 1b.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmIf changing size . . . only change X and Y, not Z.The Model is 200x300mm in sizeYou may print at higher layer