Deadpool sim city

Project: detective deadpol.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 150x150mm in sizeYou may print at higher layer heights below the Min Depth of 0.56mmThe Max Depth is 4mm and the Actual Depth is 4.1mmFilaments Used: PLA smartfil negro Transmission Distance: 0.4 PLA smartfil rojo gliter Transmission Distance: 2.4 PLA smartfil dark grey Transmission Distance: 0.8 PLA smartfil azul Transmission Distance: 1.8 PLA smartfil silk silver Transmission Distance: 2 PLA smartfil White Transmission Distance: 6This print uses 6 unique filamentsSwap Instructions: Start with negro At layer #15 (1.28mm) swap to rojo gliter At layer #17 (1.44mm) swap to dark grey At layer #21 (1.76mm) swap to azul At layer #26 (2.16mm) swap to silver At layer #30 (2.48mm) swap to White for the rest.Proyecto: detective deadpol.hfpImprima con un relleno del 100 % con una altura de capa de 0,08 mm y una capa base de 0,16 mmEl modelo tiene un tamaño de 150 x 150 mmPuede