Deadpool & Wolverine hueforge 200x200

Project: dead pool.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 200x200mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.2mmFilaments Used: PLA smartfil negro Transmission Distance: 0.4 PLA BambuLab Basic Blue Gray Transmission Distance: 3 PLA smartfil gris Transmission Distance: 0.8 PLA smatfil White Transmission Distance: 6This print uses 4 unique filamentsSwap Instructions: Start with negro At layer #11 (0.96mm) swap to Blue Gray At layer #14 (1.2mm) swap to gris At layer #18 (1.52mm) swap to White for the rest.