Deck Box w/ Plexiglass Insert

Protect your Magic: The Gathering Commander deck from damage during transport! This design is printed as three pieces and then assembled to allow the insertion of plexiglass. Required materials in addition to the print:4x2mm magnets for the slide lid. I used these: [Amazon Link]Depending on the print quality, a bit of superglue can be applied to the magnet holes before assembly to prevent the magnets from being pulled free when opening/closing the boxPlexiglass measuring roughly 90mm x 67.5mm x 2mm (H x W x D). This was the plexiglass I used: [Lowes Link]Actual space for glass in the STL is 90.5mm x 68mm x 2.55mmThis box has enough space for 100 sleeved cards, and has enough “buffer” room for up to 10 un-sleeved token cards as well!