Deku Hueforge

Deku HueforgeColor Swap   Some of the colors seem unnecessary but this is what my young son designed in hueforge. The print picture shows the prime tower on the picture, as he forgot to move it before printing (lol). He will never make that mistake again. lol.   Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used:PLA BambuLab Matte Marine Blue Transmission Distance: 2PLA BambuLab Basic BambuLab Green Transmission Distance: 8PETG JAYO Black Transmission Distance: 0.3PLA BambuLab Basic Beige Transmission Distance: 8PETG GEETECH Gray Transmission Distance: 3PLA BambuLab Matte Scarlet Red Transmission Distance: 2PETG JAYO White Transmission Distance: 6 !!!!  It appears you have mixed filament types.  Be certain this is what you want.  !!!!! Swap Instructions:Start with Marine BlueAt layer #2 (0.24mm) swap to BambuLab GreenAt layer #4 (0.4mm) swap to BlackAt layer #8 (0.72mm) swap to BeigeAt layer #16 (1.36mm) swap to GrayAt layer #17 (1.44mm) swap to Scarlet RedAt layer #19 (1.6mm) swap to White for the rest.    Please "Like", review, follow and upload make.   Commercial license As of 2/25/24 my designs are no longer allowed to be sold commercially. Do you want to sell prints of this model or any of my models? You can purchase commercial licensing at Patreon or Buy Me A Coffee. Earring Commercial Liscence is just $3 a month. A full commercial license for all of my designs is just $7 a month.