Delta LED bracket

Hi

This is a LED bracket for 2020 aluminium-profiles. I use it on an Delta 3D printer.

The LED strips are from Aliexpress. You have to remove the sheet metal cover and the adhesive strip on the back. The exposed LED plate is now glued to the printed "base_plate". I use 502 super glue.

! Make sure to position the led plate in the middle of the "base_plate" !

After drying, you can put the printed cover "cover" over it from above.
To bring the led holder into the aluminum profile, you have to slide it into the slot from above.

! Do not press into the slot from the front, it will damage the bracket !

BOM:

1.5x17cm 12V LED Strip (for cars example) like these:

https://de.aliexpress.com/item/4000169439970.html?algo_pvid=c601d64e-cc8b-4272-a45e-babf786be04e&algo_expid=c601d64e-cc8b-4272-a45e-babf786be04e-2&btsid=0bb0623b16101033791802288ef83e&ws_ab_test=searchweb0_0,searchweb201602_,searchweb201603_