Demon Guy

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 160x200mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.2mm Swap Instructions: Start with Charcoal Black At layer #7 (0.64mm) swap to Red At layer #13 (1.12mm) swap to Yellow At layer #18 (1.52mm) swap to Orange At layer #21 (1.76mm) swap to White for the rest.