Demon summoner

Picture source - author: Jules Art Then used HueForge v0.9.0 to create the model.    The Model is 150x150mm in size.  You can only modify the X and Y dimensions. Do not adjust the height (Z) in your slicer! The layers would not be correct. You may print at higher layer heights below the Min Depth of 0.48mm. The Max Depth is 2.08mm and the Actual Depth is 2.08mm.   Filaments Used: PLA Anycubic Black Transmission Distance: 0.3 PLA Elegoo + Orange Transmission Distance: 6 PLA Sunlu Meta Grey Transmission Distance: 3.5 PLA Elegoo Basic White Transmission Distance: 7 This print uses 4 unique filaments   Swap Instructions:     Start with Black     At layer #9 (0.8mm) swap to Orange     At layer #11 (0.96mm) swap to Grey     At layer #15 (1.28mm) swap to White for the rest.