Thingiverse
Desktop Risers
door bronkula
146
Downloads
113
Likes
0
Makes
# Desktop Risers
A set of risers for a tabletop or desktop setup. The base risers will raise a board up, and the middle risers can be placed to rise boards up off of boards.
I made this during Work from home, so that I could turn my table into a standing desk situation. The SCAD file is fully customizable for any board size, riser height, and all the other relevant variables. I hope this helps you out as much as it did me.
## Tips for custom board size
* If you're going to create a variation for a different board size, consider a couple things. Give yourself only about 0.2mm of tolerance. So measure real close, and then keep your print tight.
* Your printer will probably create a ridge around the finger corners. This is actually good, as it will cause the finger to sort of clamp onto the board, but it will mean you have to sort of push to get the risers onto your board.
A set of risers for a tabletop or desktop setup. The base risers will raise a board up, and the middle risers can be placed to rise boards up off of boards.
I made this during Work from home, so that I could turn my table into a standing desk situation. The SCAD file is fully customizable for any board size, riser height, and all the other relevant variables. I hope this helps you out as much as it did me.
## Tips for custom board size
* If you're going to create a variation for a different board size, consider a couple things. Give yourself only about 0.2mm of tolerance. So measure real close, and then keep your print tight.
* Your printer will probably create a ridge around the finger corners. This is actually good, as it will cause the finger to sort of clamp onto the board, but it will mean you have to sort of push to get the risers onto your board.
bronkula publiceert ook op
3 extra modellen op 1 andere platforms
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!
