MakerWorld

Electronics

device case

by VAL1SOR · Electronics

5 Downloads

1 Likes

0 Makes

CR-10 SE printer, 1h print time, 0.20mm layer height, 15% infill, ASA material.hot plate 110 C, nozzle 235 C.10% density no supports.Used brim for adhesion.

device casing

Category

Electronics

Source

MakerWorld

Published

12.01.2025

Updated

30.04.2026

What you need to print this: Beginner Medium confidence

Why?

no supports · 0.20mm layers

Support-free Single piece

Supports 0/3

Assembly 0/3

Settings 1/3

Bed size 0/3

Post-process 0/3

Printer

FDM / FFF

File format

STL

Material

PLA, ASA

Layer height

0.2 mm

Est. print time

1 h

Software

Cura, PrusaSlicer, or similar

Frequently Asked Questions

Does device case need supports when printing?

No supports needed for device case — it's designed to print clean off the bed.

How long does it take to print device case?

According to the design notes, device case takes approximately 1 hours to print at standard settings (0.2 mm layer height, 15% infill). Actual print time varies based on your printer speed, layer height, and infill density.

What file format is device case available in?

device case is available in STL format. These files can be opened and sliced using free software such as Cura, PrusaSlicer, Bambu Studio, or OrcaSlicer for FDM printing, or ChiTuBox and Lychee Slicer for resin printing. The download is provided through MakerWorld.

Is device case free to download?

Yes, device case is available as a free download through MakerWorld. Always check the license on the original platform to understand commercial use, remixing, and attribution requirements.

No ratings yet

No comments yet – be the first!

Similar Models

6 Suggestions

device case

Similar Models

Add to Collection