Dice vault

First off, thanks to dhasday for his original work. This is a re-mix of the dice vault found here, http://www.thingiverse.com/thing:1777448. I added tabs that run the length of both side on the bottom and two recesses that run the length of both sides of the top. I also added foam to the bottom found here, http://www.homedepot.com/p/Frost-King-E-O-1-1-4-in-x-7-16-in-x-10-ft-Black-High-Density-Rubber-Foam-Weatherstrip-Tape-R516H/100090883. Just cut the foam to size, peel off the release paper and stick it in the bottom of the dice vault. Profit.

4/6/2017 - Used Gorilla glue to attach the magnets. This glue expands 3 times when drying. You will need to check the magnets about every 30 minutes to make sure they didn't get pushed out of the hole. After about 2 hours the magnets shouldn't move much more.


Assembled Dimensions:
150 mm x 33 mm x 24 mm