Thingiverse
Direct conversion -Ender 3 + e3d V6
door dalovering
39
Downloads
29
Likes
0
Makes
A conversion for ender 3 with e3d v6 to direct drive!
Uses all stock extruder parts
Requires:
+ A stepper motor wire extension for the extruder motor ~250mm long
+ 2x 3mm x 15mm screws
+ 2x 3mm nuts
+ 3x 3mm x 6mm screws
+ 2x 2mm heat set inserts (and soldering iron to install)
+ Some PTFE tubing for filament routing (I need to add in a bracket to mount a fitting for this)
+ An e3d V6 hot end
+ Stock e3d V6 cooling
+ Stock part cooling
E3D V6 mount heavily inspired by the matter hackers mount: https://www.matterhackers.com/store/l/creality-cr-10-e3d-upgrade/sk/M2A21RQ3
Included fusion360 file for anyone who wants to modify or add on to this!
This seemed to finally fix my extrusion problems! I think I will upgrade to a titan direct drive eventually but this works for now.
TBD on whether ringing is too bad.
Uses all stock extruder parts
Requires:
+ A stepper motor wire extension for the extruder motor ~250mm long
+ 2x 3mm x 15mm screws
+ 2x 3mm nuts
+ 3x 3mm x 6mm screws
+ 2x 2mm heat set inserts (and soldering iron to install)
+ Some PTFE tubing for filament routing (I need to add in a bracket to mount a fitting for this)
+ An e3d V6 hot end
+ Stock e3d V6 cooling
+ Stock part cooling
E3D V6 mount heavily inspired by the matter hackers mount: https://www.matterhackers.com/store/l/creality-cr-10-e3d-upgrade/sk/M2A21RQ3
Included fusion360 file for anyone who wants to modify or add on to this!
This seemed to finally fix my extrusion problems! I think I will upgrade to a titan direct drive eventually but this works for now.
TBD on whether ringing is too bad.
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!
![[Updated 2019.02.29] Ender 3 E3D V6 Minimalist with Stock Fan Duct for Basaraba Direct Drive Conversion Kit](/imgproxy.php?url=https%3A%2F%2Fcdn.thingiverse.com%2Frenders%2F9b%2Fd5%2Fa3%2F00%2Fa4%2F5f7e839e07a07b61a84087792a095eae_display_large.jpg&w=400&h=300)