Thingiverse
Direct conversion -Ender 3 + e3d V6
di dalovering
39
Download
29
Likes
0
Makes
A conversion for ender 3 with e3d v6 to direct drive!
Uses all stock extruder parts
Requires:
+ A stepper motor wire extension for the extruder motor ~250mm long
+ 2x 3mm x 15mm screws
+ 2x 3mm nuts
+ 3x 3mm x 6mm screws
+ 2x 2mm heat set inserts (and soldering iron to install)
+ Some PTFE tubing for filament routing (I need to add in a bracket to mount a fitting for this)
+ An e3d V6 hot end
+ Stock e3d V6 cooling
+ Stock part cooling
E3D V6 mount heavily inspired by the matter hackers mount: https://www.matterhackers.com/store/l/creality-cr-10-e3d-upgrade/sk/M2A21RQ3
Included fusion360 file for anyone who wants to modify or add on to this!
This seemed to finally fix my extrusion problems! I think I will upgrade to a titan direct drive eventually but this works for now.
TBD on whether ringing is too bad.
Uses all stock extruder parts
Requires:
+ A stepper motor wire extension for the extruder motor ~250mm long
+ 2x 3mm x 15mm screws
+ 2x 3mm nuts
+ 3x 3mm x 6mm screws
+ 2x 2mm heat set inserts (and soldering iron to install)
+ Some PTFE tubing for filament routing (I need to add in a bracket to mount a fitting for this)
+ An e3d V6 hot end
+ Stock e3d V6 cooling
+ Stock part cooling
E3D V6 mount heavily inspired by the matter hackers mount: https://www.matterhackers.com/store/l/creality-cr-10-e3d-upgrade/sk/M2A21RQ3
Included fusion360 file for anyone who wants to modify or add on to this!
This seemed to finally fix my extrusion problems! I think I will upgrade to a titan direct drive eventually but this works for now.
TBD on whether ringing is too bad.
Hai stampato questo modello? Accedi e condividi il tuo make!
Accedi per lasciare un commento
AccediAncora nessun commento – sii il primo!
![[Updated 2019.02.29] Ender 3 E3D V6 Minimalist with Stock Fan Duct for Basaraba Direct Drive Conversion Kit](/imgproxy.php?url=https%3A%2F%2Fcdn.thingiverse.com%2Frenders%2F9b%2Fd5%2Fa3%2F00%2Fa4%2F5f7e839e07a07b61a84087792a095eae_display_large.jpg&w=400&h=300)