Slicer Discord
Display Shelf – 3D-Druckmodell von MakerWorld MakerWorld
Other House Models

Display Shelf

104 Downloads
43 Likes
31 Makes
Zum Modell
只可用于 孔径6mm 孔距16mm 洞洞板上.Only can be used on Pegboard with 6mm apertures and 16mm hole spacing. 置物板有两种款式: 1.有厚度的光滑平面 2. 末端较薄的纹路平面平面尺寸240mm*90mm两种置物板均可轻松承重1kgThere are two styles of display shelves:1. A thick, smooth surface2. A thinner, textured surface at the edgesThe dimensions of the surface are 240mm x 90mm.Both types of display boards can easily support a weight of 1kg.
Kategorie
Other House Models
Quelle
MakerWorld
Veröffentlicht
Aktualisiert
Was du zum Drucken brauchst: Mittel Niedrige Konfidenz
Einteilig
Supports 1/3
Zusammenbau 0/3
Einstellungen 1/3
Druckbett 0/3
Nachbearbeitung 1/3
Drucker
FDM / FFF
Dateiformat
STL
Material
PLA
Nachbearbeitung
Schleifen
Software
Cura, PrusaSlicer o. Ä.
Noch keine Bewertungen
Noch keine Kommentare – sei der Erste!

Ähnliche Modelle

6 Vorschläge
Feed Blog Slicer Kostenrechner Bildersuche Einreichen Kontakt Discord ☕ Buy me a coffee
DE EN FR ES IT NL

Zur Sammlung hinzufügen