Disting EX OLED display bracket

I designed and 3D printed this bracket to hold the secondary OLED display for the Disting EX. No soldering is needed.
[Photos](https://photos.app.goo.gl/tf2mLZe4BE9tbvT7A)

This version mounts at the bottom to a Eurorack rail. It is 14HP. Note it is not 1U and will not fit in a 1U slot. It does not need or use the PCB from Expert Sleepers/Thonk. But it uses the exact same OLED display from [BuyDisplay.com](https://www.buydisplay.com/arduino-2-2-inch-128x32-oled-breakout-board-display-module-blue-on-black); choose the "Pin Header Connection-4 Wire SPI" option.

The bracket holds the OLED display to which you directly connect 7 Dupont socket cables. The cables thread through a slot on the back. Sockets at the other ends of these Dupont cables connect to the two jacks on back of the Disting EX (just as with the PCB). Refer to the Expert Sleepers Github page for details on the connections: [Expert Sleepers Github page](https://expertsleepersltd.github.io/hardware/1U-display-adaptor/).