DIY NAS SERVER CASE

This is my 3D printed and laser cut custom NAS server case !
The case is composed of a 3D printed structure that hold the laser cut parts made with acrylic.
It can fit up to an ATX motherboard (compatible w/ mATX and ITX), an ATX power supply and up to 6 3,5" HDDs.
Plus 2 120mm fan openings on the front and 1 on the rear.
I've also designed a SATA backplane to facilitate cable routing : https://hackaday.io/project/170458-backplane-for-diy-nas

To assemble the case you need :
14 M3 x19mm screws
8 6mm spacers for the side panels
some 6mm spacers for the motherboard
some M3 nuts (to maintain the spacers)
1 16mm momentary switch