Doberman

Project: DOBERMANPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 123.3x220mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.3mmFilaments Used: PLA PolyLite Black Transmission Distance: 0.3 PLA BambuLab Basic Blue Gray Transmission Distance: 3 PLA Kexcelled Bronze Transmission Distance: 0.8 PLA BambuLab Basic Jade White Transmission Distance: 5This print uses 4 unique filamentsSwap Instructions: Start with Black At layer #10 (0.88mm) swap to Blue Gray At layer #14 (1.2mm) swap to Bronze At layer #22 (1.84mm) swap to Jade WhiteBorder Only Colors from here until the end. At layer #28 (2.32mm) swap to Bronze for the rest.