Dolphins Jumping

Project: dolphins.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 200x200mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.2mmFilaments Used: PLA+ Sunlu Black Transmission Distance: 0.1 PLA+ Sunlu Blue Grey Transmission Distance: 3 PLA+ Sunlu Grey Transmission Distance: 2 PLA+ Sunlu Sky Blue Transmission Distance: 4 PLA+ Sunlu Skin Transmission Distance: 5 PLA BambuLab Basic Jade White Transmission Distance: 5This print uses 6 unique filamentsSwap Instructions: Start with Black At layer #9 (0.8mm) swap to Blue Grey At layer #13 (1.12mm) swap to Grey At layer #14 (1.2mm) swap to Sky Blue At layer #18 (1.52mm) swap to Skin At layer #26 (2.16mm) swap to Jade White for the rest.