donald duck hueforge

Project: donald duck.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 114.29x200mm in sizeYou may print at higher layer heights below the Base Thickness of 0.48mmThe Max allowed Thickness is 2.24mm and the Actual Thickness is 2mmFilaments Used: #080a0d PLA PolyLite Black Transmission Distance: 0.3 #e11021 PLA Copymaster 3D Red Transmission Distance: 4 #9d432c PLA BambuLab Basic Brown Transmission Distance: 2 #4c5f71 PLA BambuLab Basic Blue Gray Transmission Distance: 3 #e2dedb PLA PolyLite White Transmission Distance: 5 #f5547c PLA BambuLab Basic Hot Pink Transmission Distance: 3.9 #ff7900 PLA Kexcelled Fluorescent Orange Transmission Distance: 6.5 #fce300 PLA BambuLab Basic Yellow Transmission Distance: 6This print uses 8 unique filamentsSwap Instructions: Start with Black At layer #7 (0.64mm) swap to Red At layer #9 (0.8mm) swap to Brown At layer #10 (0.88mm) swap to Blue Gray At layer #11 (0.96mm) swap to White At layer #12 (1.04mm) swap