Donkey Mafia

designed to be easily printed with a minimal amount of support material. For a perfect finish, I recommend using PLA/PHA  COPPERFILL, to have the same effect. To print with CopperFill PLA filament, there are some specific parameters to consider to get the best results: Extruder temperature: 190-210°C. The exact temperature may vary depending on the printer and environmental conditions1. Print bed temperature: 55-60°C. This helps improve the adhesion of the first layer1. Printing speed: 50-80mm/s. A slower speed can improve print quality1. Layer height: 0.16-0.2 mm. This depends on the desired level of detail1. Retraction: Retraction distance of approximately 4.5 mm and retraction speed of 25-45 mm/s1. Additional Tips: Cooling: Using a fan to cool the newly extruded filament can improve printing quality2. Post-processing: After printing, the model can be polished with steel wool to obtain a copper-like shiny effect1. If you need additional details or have specific questions about your setup, let me know! 😊