Double Trigger Project Box (Updated)

https://www.youtube.com/shorts/7VJnRISm_m0

This project box is designed to trigger 2 different systems with the same button. Box body features a 10mm hole for wires/cables and lid features holes for 2x 10mm LEDs, 2x DPDT/DPST toggle switches, and 1x momentary button. Lid is secured to body with M4 screws.

If wired correctly as a Double Trigger, switches toggled to on position will illuminate LED and a press of the momentary button would direct power to whatever system you want activated/triggered/or momentarily powered. In Escape Room/Haunted House operation this can be used as a fail safe to provide manual control to the operator to trigger specific effects/lights/sound effects/etc. There should be room in the box to add a 9v battery to illuminate the LEDs. Plan requires power from the battery and other source to the switches so that in the on position; one pole of the switch (double pole switches are required for this example) is used to power each LED (with resistor to safely powe