Downdraft Table

This is a Downdraft Table I designed to reduce the amount of carbon dust I leave floating around the shop while cutting carbon tubes. Attached to a shop vac, this creates enough suction to effectively capture dust particles caused by most of the “destructive manufacturing” techniques we use as makers. I use this when I'm cutting carbon tubes, sanding foam/wood, and even mixing microballons/plaster. This does NOT replace the need for a respirator, but it does greatly reduce the amount of stray particles floating around in the air after working. You'll find several different objects in the 3MF files. You need to print the Base, one Top Plate, and one Hose Adapter. There are test objects for the Base and Top plate so you can check clearance fits before committing to printing a half kilo of plastic. Parts needed:- 4x M3x8 Bolts- 4x M3x4x5 Heat Set Inserts- 6x M4x8x6 Heat Set Inserts (Optional)- 6x M4x12 Bolts (Optional)- Thin Cardboard (Cereal Box or similar) Base:The Base is the s