dragon eye yellow hueforge

this is an attempt to add colour to a hueforgeplease post pics not for commercial useProject: dragon eye6.jpgPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 200x133.33mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.3mmFilaments Used: PLA PolyLite Black Transmission Distance: 0.3 PLA Kexcelled Silver Transmission Distance: 0.4 PLA BambuLab Matte Ice Blue Transmission Distance: 3.5 PLA PolyLite White Transmission Distance: 5This print uses 4 unique filamentsSwap Instructions: Start with Black At layer #8 (0.72mm) swap to Silver At layer #13 (1.12mm) swap to Ice Blue At layer #23 (1.92mm) swap to White for the rest.