Thingiverse
Dragon PSU
von aaronroma
18
Downloads
14
Likes
0
Makes
The Dragon PSU is an upgraded power supply I created for my Reach3D printer (http://reach3dprinters.com/). However there's nothing printer specific about this PSU, and it can be used with most 3D printers, if this fits your needs.
I was trying to accomplish a few things by upgrading my power supply. Make more amperage available to the printer. Be able to more quickly heat the bed, and to higher temperatures, without overloading the RAMPS board. And to utilize features of an ATX style PSU to remotely control printer power.
This PSU is designed around some specific hardware components. You will either need to use these same components, or take my ideas and redesign them to fit other components. I've also designed mine with a quick disconnect plug to be able to easily disconnect the PSU and all related wiring from the printer for easier transport. This is optional, of course.
Here's a list of components and hardware that are needed:
Mini-ITX Power Supply
https://www.ama
I was trying to accomplish a few things by upgrading my power supply. Make more amperage available to the printer. Be able to more quickly heat the bed, and to higher temperatures, without overloading the RAMPS board. And to utilize features of an ATX style PSU to remotely control printer power.
This PSU is designed around some specific hardware components. You will either need to use these same components, or take my ideas and redesign them to fit other components. I've also designed mine with a quick disconnect plug to be able to easily disconnect the PSU and all related wiring from the printer for easier transport. This is optional, of course.
Here's a list of components and hardware that are needed:
Mini-ITX Power Supply
https://www.ama
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!