Thingiverse
Dragon - Right Wing
door Greenfieldaddy
5
Downloads
16
Likes
0
Makes
3D Printed Dragon Right Wing
8/15/2025 - Version 1
Continuing on with making props, I present a Dragon Right Wing. It is designed like all the other props.
I'm making these designs available for others to give back to the community that I have benefited from over the years.
If you do print this, I would be very interested in seeing your work and any suggestions for improvements. It has been printed successfully. I don't
anticipate any errors but I will correct them if found by me or others!
Description:
It is composed of 29 separate pieces. (there are 2 test pieces used to test print and don't attach to the wing).
Most pieces are 6mm thick with a 2mm thick raised edge that is 10mm high. This has proven to be plenty strong through several New York Winters.
Its approximate size is 663mm wide x 1152mm high (26in x 46in).
It holds 300 pixels. (Yeah, finally one of my props won't require modifying strings to work.)
I've had my printed props out in the Upstate NY weather the last 2 se
8/15/2025 - Version 1
Continuing on with making props, I present a Dragon Right Wing. It is designed like all the other props.
I'm making these designs available for others to give back to the community that I have benefited from over the years.
If you do print this, I would be very interested in seeing your work and any suggestions for improvements. It has been printed successfully. I don't
anticipate any errors but I will correct them if found by me or others!
Description:
It is composed of 29 separate pieces. (there are 2 test pieces used to test print and don't attach to the wing).
Most pieces are 6mm thick with a 2mm thick raised edge that is 10mm high. This has proven to be plenty strong through several New York Winters.
Its approximate size is 663mm wide x 1152mm high (26in x 46in).
It holds 300 pixels. (Yeah, finally one of my props won't require modifying strings to work.)
I've had my printed props out in the Upstate NY weather the last 2 se
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!
