Dragon series #5 Hueforge

Project: Dragon_05.hfpPrint at 100% infill with a layer height of 0.04mm with a base layer of 0.16mmThe Model is 114.29x200mm in sizeYou may print at higher layer heights below the Base Thickness of 0.48mmThe Max allowed Thickness is 2.4mm and the Actual Thickness is 2.32mm Filaments Used: #000000 PLA BambuLab Basic Black Transmission Distance: 0.1 #ffffff PLA BambuLab Basic Jade White Transmission Distance: 5.8 #c00d1e PLA BambuLab Basic Red Transmission Distance: 3.7 #fce300 PLA BambuLab Basic Yellow Transmission Distance: 5.2This print uses 4 unique filaments Swap Instructions: Start with Black At layer #12 (0.6mm) swap to Jade White At layer #15 (0.72mm) swap to Black At layer #26 (1.16mm) swap to Red At layer #36 (1.56mm) swap to Yellow At layer #46 (1.96mm) swap to Jade White for the rest.