Thingiverse

Draining Sponge Caddy

by KDaviou

3 Downloads

1 Likes

0 Makes

Go to Model

This model was designed to print without supports. Approximately 9 hours of print time total.

Source

Thingiverse

What you need to print this: Beginner Medium confidence

Why?

no supports

Support-free Single piece

Supports 0/3

Assembly 0/3

Settings 1/3

Bed size 0/3

Post-process 0/3

Printer

FDM / FFF

File format

STL

Material

Est. print time

9 h

Software

Cura, PrusaSlicer, or similar

Same designer, more platforms

KDaviou also publishes on

8 additional models across 1 more platforms

Printables

8 models

♥ 118 ↓ 518 ⚒ 5

Frequently Asked Questions

Does Draining Sponge Caddy need supports when printing?

No supports needed for Draining Sponge Caddy — it's designed to print clean off the bed.

How long does it take to print Draining Sponge Caddy?

According to the design notes, Draining Sponge Caddy takes approximately 9 hours to print at standard settings (0.2 mm layer height, 15% infill). Actual print time varies based on your printer speed, layer height, and infill density.

What file format is Draining Sponge Caddy available in?

Draining Sponge Caddy is available in STL format. These files can be opened and sliced using free software such as Cura, PrusaSlicer, Bambu Studio, or OrcaSlicer for FDM printing, or ChiTuBox and Lychee Slicer for resin printing. The download is provided through Thingiverse.

Is Draining Sponge Caddy free to download?

Yes, Draining Sponge Caddy is available as a free download through Thingiverse. Always check the license on the original platform to understand commercial use, remixing, and attribution requirements.

No ratings yet

No comments yet – be the first!

Draining Sponge Caddy

Add to Collection