Dreamscape

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 200x200mm in size. You can change X and Y but Z must remain the same.You may print at higher layer heights below the Min Depth of 0.48mmActual Depth is 4.6mm Filaments Used:PLA BambuLab Basic Pink Transmission Distance: 8PLA BambuLab Basic Orange Transmission Distance: 5PLA BambuLab Basic Yellow Transmission Distance: 6PLA BambuLab Basic Jade White Transmission Distance: 5PLA BambuLab Basic Black Transmission Distance: 0.3PLA BambuLab Basic Blue Gray Transmission Distance: 3PLA BambuLab Basic Beige Transmission Distance: 8PLA BambuLab Basic Silver Transmission Distance: 0.5This print uses 8 unique filaments. Substitute as needed. Swap Instructions:Start with PinkAt layer #14 (1.2mm) swap to OrangeAt layer #16 (1.36mm) swap to YellowAt layer #19 (1.6mm) swap to Jade WhiteAt layer #27 (2.24mm) swap to BlackAt layer #39 (3.2mm) swap to Blue GrayAt layer #43 (3.52mm) swap to BeigeAt layer #48 (3.92m