Thingiverse
Drill Press Vise - Mostly Printed
door thebelin
1k
Downloads
775
Likes
3
Makes
# Drill Press Vise
* Mostly Printed
* No Supports
* Two Tone Color Scheme
* Easily Change Grip Inserts
* Torque Bolt
# BOM
1. Printed Parts
2. 2X 12mm M3 Hex Socket Cap Screws*
3. 2X M3 nuts
# Instructions
* Capitalized items are printed parts.
* The printed parts marked with an [a] should be printed in your accent color.
* Print multiples of anything with an x2 or x4 in the name.
* The Torque Bolt can printed instead of the Bolt_Extended.
* Place the Drive Collar in the vise Body, the holes should align.
* Screw the Bolt through the Drive Collar
* Place the M3 nuts in the Lower Jaw, trapped, and place it under the Bolt, cupping the ball joint end of the Bolt.
* Screw the M3 bolts through the upper jaw into the Lower Jaw. To ensure that your nuts don't turn in the slot, push a flathead screwdriver inside the nut trap in the Lower Jaw when fully tightening. Don't overtighten.
* The Lock Bolts are made to be pushed through the slots. They have a square shank
* Mostly Printed
* No Supports
* Two Tone Color Scheme
* Easily Change Grip Inserts
* Torque Bolt
# BOM
1. Printed Parts
2. 2X 12mm M3 Hex Socket Cap Screws*
3. 2X M3 nuts
# Instructions
* Capitalized items are printed parts.
* The printed parts marked with an [a] should be printed in your accent color.
* Print multiples of anything with an x2 or x4 in the name.
* The Torque Bolt can printed instead of the Bolt_Extended.
* Place the Drive Collar in the vise Body, the holes should align.
* Screw the Bolt through the Drive Collar
* Place the M3 nuts in the Lower Jaw, trapped, and place it under the Bolt, cupping the ball joint end of the Bolt.
* Screw the M3 bolts through the upper jaw into the Lower Jaw. To ensure that your nuts don't turn in the slot, push a flathead screwdriver inside the nut trap in the Lower Jaw when fully tightening. Don't overtighten.
* The Lock Bolts are made to be pushed through the slots. They have a square shank
thebelin publiceert ook op
11 extra modellen op 1 andere platforms
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!
