Thingiverse
Drill Template for Segment Sled
von DonTheMaker
0
Downloads
1
Likes
0
Makes
Gary who is ThePapa1947 on YouTube is a brilliant wood turner.
One of his video's Gary is making an ingenious sled for cutting segments for a "Vortex Bowl". The hole placement needs to be very accurate. So I designed this little template to help. One variation from Gary's design is I used a .5 inch drill where he used .357 inch.
Two templates are included. Use one or the other depending if you want to drill the holes from the top or the bottom.
The notch in the one hole is used to locate the template to the band saw blade cut. The 2 smaller holes are to screw it down prior to drilling.
I printed mine using 25% infill.
Gary's YouTube Page
https://www.youtube.com/c/ThePapa1947
Gary's Segment Cutting Sled
https://www.youtube.com/watch?v=2M3D5wst_pM
One of his video's Gary is making an ingenious sled for cutting segments for a "Vortex Bowl". The hole placement needs to be very accurate. So I designed this little template to help. One variation from Gary's design is I used a .5 inch drill where he used .357 inch.
Two templates are included. Use one or the other depending if you want to drill the holes from the top or the bottom.
The notch in the one hole is used to locate the template to the band saw blade cut. The 2 smaller holes are to screw it down prior to drilling.
I printed mine using 25% infill.
Gary's YouTube Page
https://www.youtube.com/c/ThePapa1947
Gary's Segment Cutting Sled
https://www.youtube.com/watch?v=2M3D5wst_pM
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!