Slicer Discord
Drive rack – 3D-printbaar model van Thingiverse Thingiverse

Drive rack

door Bigsmoke3D
22 Downloads
23 Likes
0 Makes
Model downloaden
HDD drive rack
I designed this rack to hold 16 drives in total. 8 3.5inch drives and 8 2.5inch drives.
If you're anything like me. You have a pile of decent, salvaged drives lying around the house. With a rack like this, you can organize them neatly in one location and wire them into a DAS storage.

What you'll need:
HBA Raid card - im using this one: https://aliexpress.com/item/1005005956392017.html?
SAS to x4 sata cable - https://aliexpress.com/item/1005006245221731.html?
One or two 120mm fans - im using these cheap ones - https://aliexpress.com/item/1005002642198655.html?
M3 threaded inserts - https://aliexpress.com/item/1005006071488810.html?
Optional dampening pads - https://aliexpress.com/item/1005005854472187.html?

*I also tested regular sata expansion cards but i found them unreliable and slow, Raid cards are the best solution here. Just install the raid card, connect SAS to sata cables, connect all drives and set up the software raid via windows drive pool configur
Bron
Thingiverse
Wat je nodig hebt om te printen: Gemiddeld Lage betrouwbaarheid
Eendelig Hardware nodig
Supports 1/3
Montage 0/3
Instellingen 1/3
Bedgrootte 0/3
Nabewerking 1/3
Printer
FDM / FFF
Bestandsformaat
STL
Materiaal
Nabewerking
Hardware
Software
Cura, PrusaSlicer of vergelijkbaar
Nog geen beoordelingen
Nog geen reacties – wees de eerste!

Vergelijkbare modellen

6 Suggesties
Feed Blog Slicer Kostenrekenmachine Zoeken op afbeelding Indienen Kontakt Discord ☕ Buy me a coffee
DE EN FR ES IT NL

Toevoegen aan collectie