Druide

It is possible to print without material system by manually changing the filament (setting filament change or pause) in the slicer, depending on your printer and sw support. The Model is 150x150mm in size. You may print at higher layer heights below the Min Depth of 0.56mm. The Max Depth is 2.2mm and the Actual Depth is 2.2mm. Filaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Blue Gray Transmission Distance: 3 PLA BambuLab Basic Blue Transmission Distance: 4 PLA BambuLab Basic Beige Transmission Distance: 8 PLA BambuLab Basic Jade White Transmission Distance: 5 This print uses 5 unique filaments Swap Instructions: Start with Black At layer #10 (0.88mm) swap to Blue Gray At layer #12 (1.04mm) swap to Blue At layer #13 (1.12mm) swap to Beige At layer #17 (1.44mm) swap to Jade White for the rest.