DSLR rig

Camera used is Nikon D3200 with dimensions on the image, to check if your camera will fit google “[Your camera model] dimensions” , most cameras should be centered inside. If your camera exceeds my original dimensions, try to use customisation tool to change overall dimensions of the frame. Meanwhile i make the project i promised, i decided to make camera holder that i could use in it too, so while it's printing i made this. As you see it holds pretty well [ I was surprised how solid it felt ] Whole projects takes about 130-150g of plastic [ Depending on infill, 5% were enough for me ] , Single M6 screw and nut and from 4 to 10 M4 screws and nuts. M6x15+ Screw1 pcsM6 nut1 pcsM4x15 Screw10 pcsM4 nut10 pcs