Dusk

 The Model is 200x200mm in size. You can adjust the X and Y but Z must remain the same.  You may print at higher layer heights below the Min Depth of 0.48mm  The Max Depth is 2.2mm and the Actual Depth is 2.2mm Filaments Used: PLA PolyLite Black Transmission Distance: 0.3 PLA BambuLab Basic Blue Gray Transmission Distance: 3 PLA BambuLab Basic Brown Transmission Distance: 2 PLA PolyLite White Transmission Distance: 5 PLA PolyLite Grey Transmission Distance: 1 PLA BambuLab Basic Red Transmission Distance: 4 This print uses 6 unique filaments. Substitute as needed. Swap Instructions: Start with Black At layer #7 (0.64mm) swap to Blue Gray At layer #12 (1.04mm) swap to Brown At layer #13 (1.12mm) swap to White At layer #15 (1.28mm) swap to Grey At layer #20 (1.68mm) swap to Red for the rest.