Easter Bunny

Size 120x200mm. Do NOT adjust the thickness (Z) in your slicer! The layers will not come out right. You CAN adjust the other dimensions (X,Y) though to make it bigger or smaller, just not the thickness. Nozzle: 0.4 You may print at higher layer heights below the Min Depth of 0.48mm. The Max Depth is 1.9mm and the Actual Depth is 1.9mm These were my settings and colors for my print that you see in the picture. Your results may be depending on the filament you use.  Filaments Used:     PLA PolyLite Black Transmission Distance: 0.3     PLA Sunlu META Grey Transmission Distance: 3.6     PLA BambuLab Basic Orange Transmission Distance: 4.8     PLA Elegoo + White Transmission Distance: 6 This print uses 4 unique filaments   Swap Instructions:     Start with Black     At layer #8 (0.72mm) swap to Grey     At layer #11 (0.96mm) swap to Orange     At layer #13 (1.12mm) swap to White for the rest.   Share your prints, and…