Easy Soap Dish

Easy Soap Dish is a soap (or sponge) holder designed to be easily printed with minimal material, without the need for supports or raft. The product measures 70 mm in width, 120 mm in length, and 27 mm in height. The design includes a base with a corner hole for draining residual water and a practical honeycomb pattern on the top for faster drying. The 3mf file available for printing includes two versions with honeycomb infill at 5% and 15%, allowing you to choose the desired level of lightness and strength. To print the Easy Soap Dish with a 0.4 nozzle, you need to import the file into your slicer, split the soap holder into parts, and position the piece with the widest side facing the print bed. Then, apply the following print settings: - Outer perimeter of the holder: 2 walls, 15% grid infill, 3 bottom layers, 5 top layers, 0.2 mm layer height. - Central part of the holder: 1 wall, infill with the chosen percentage (5% or 15%), 0 top and bottom layers, 0.2 mm layer height. - Base of the soap dish: 0.2 mm layer height, 15% grid infill, 3 bottom layers, 5 top layers. To achieve the honeycomb effect, simply select this option as the infill type for the central part of the soap or sponge holder.