Ecto Goggles

My lenses are modeled after pics of "GBFan Lowberg's" actual Mirax lenses and based off "GBFan WShawn's" STL model.
I modified his STL model by breaking them up into 4 pieces to rotate like the original Mirax Laborec lenses.
I modeled the AN/PVS-5 Night Vision Goggles from a pair I own.
The STL files are set to higher quality to reduce flat spots around the circumference of the lenses.
The thumb screws are from Mcmaster Carr, I wouldn't bother printing these out.
The Lenses are 4-40 thread size and can be tapped using 4-40 for the thumb screws and 10/24 for the base.
All other screws can be purchased from Mcmaster or other places. These will attach the lenses to the plate and accent the goggle frames.

Snap Buttons can be purchased from Amazon. Original Snaps were from DOT. They no longer carry the original snaps.
Be sure to leave the truss head screw loose on the plate so the bottom lenses rotate.
And clean out the grooves of the upper lenses when using supports.
I prin