Thingiverse
Edward Plumer
door eplumer
7
Downloads
2
Likes
0
Makes
Remix of the case to add space for and access to the two terminal blocks of the PiFace Relay+ and PiFace Motor Extra boards.
Case is made in three parts rather than original two so that the top cover can be removed without disconnecting any of the terminal block connections.
Print four of the spacers I have included to support the PiFace boards firmly as they don't come with enough standoffs. You will probably need to retap the spacers and the case bottom for #4-40 screws. I screwed the main board in from the underside and the expansion boards from the top into the spacers.
Case is made in three parts rather than original two so that the top cover can be removed without disconnecting any of the terminal block connections.
Print four of the spacers I have included to support the PiFace boards firmly as they don't come with enough standoffs. You will probably need to retap the spacers and the case bottom for #4-40 screws. I screwed the main board in from the underside and the expansion boards from the top into the spacers.
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!