eevee bookmark

von Loris Ninno · Hueforge & Lithophane

115 Downloads

48 Likes

76 Makes

Very simple bookmark with eevee art made with hueforge. This is the instruction on how to print.Enjoy!Project: eevee bookmark.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 57.36x150mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 1.2mmFilaments Used: PLA BambuLab Matte Ivory White Transmission Distance: 3.5 PLA PolyLite Black Transmission Distance: 0.3This print uses 2 unique filamentsSwap Instructions: Start with Ivory White At layer #5 (0.48mm) swap to Black At layer #11 (0.96mm) swap to Ivory White for the rest. Boost Me