Thingiverse

Eevee Sylveon

by vividprintwork

1 Downloads

2 Likes

0 Makes

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x200mm in size

You may print at higher layer heights below the Base Thickness of 0.32mm

The Max allowed Thickness is 1.2mm and the Actual Thickness is 1.2mm

#080a0d PLA PolyLite Black Transmission Distance: 0.3

#f79dbc PLA Overture Pink Transmission Distance: 3.2

#e2dedb PLA PolyLite White Transmission Distance: 5

This print uses 3 unique filaments

Swap Instructions:

Start with Black

At layer #6 (0.56mm) swap to Pink

At layer #10 (0.88mm) swap to White for the rest.

hueforge hueforge bookmark hueforgeart hueforged pokemon pokemon cards Pokemon Go Pokemon Scarlet pokemon tcg pokemon toy Pokemon Violet pokemongo Pokemons

Source

Thingiverse

What you need to print this: Intermediate Low confidence

Why?

large print

Single piece

Supports 1/3

Assembly 0/3

Settings 1/3

Bed size 2/3

Post-process 0/3

Printer