Thingiverse
Egg Mold
di dominik_h
41
Download
42
Likes
0
Makes
An Egg Mold for creating egg-shaped ice-"eggs", gelatinous objects, decorations for an alien horror movie-night or even egg-shaped pralines.
This "Thing" is designed to be sliced with slic3r with 0.45 mm perimeters and 25% Overlap. (Default values for "Original Prusa" 0.4mm nozzle Profiles)
Printing with other settings is possible but not recommended.
Printing with the recommended settings will create a print with exactly 4 "Walls", e.g. 2 perimeters on out- and inside.
The tolerance of the supplied .stl is 0.25mm wall-to-wall, if you need a stl with higher tolerance please comment, or just sand the surfaces a bit.
If you want a bigger or smaller mold, please comment instead of resizing. I take pride in designing 'optimal' STLs for given slic3r/cura settings, a bigger mold will not really necessitate thicker walls, but all molds need to be able to hold liquids.
The notches in the top and bottom part are for attaching rubberbands so that the cap does not float.
This "Thing" is designed to be sliced with slic3r with 0.45 mm perimeters and 25% Overlap. (Default values for "Original Prusa" 0.4mm nozzle Profiles)
Printing with other settings is possible but not recommended.
Printing with the recommended settings will create a print with exactly 4 "Walls", e.g. 2 perimeters on out- and inside.
The tolerance of the supplied .stl is 0.25mm wall-to-wall, if you need a stl with higher tolerance please comment, or just sand the surfaces a bit.
If you want a bigger or smaller mold, please comment instead of resizing. I take pride in designing 'optimal' STLs for given slic3r/cura settings, a bigger mold will not really necessitate thicker walls, but all molds need to be able to hold liquids.
The notches in the top and bottom part are for attaching rubberbands so that the cap does not float.
Hai stampato questo modello? Accedi e condividi il tuo make!
Accedi per lasciare un commento
AccediAncora nessun commento – sii il primo!
