Eiffel Tower

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 120.12x200mm in sizeYou may print at higher layer heights below the minimum depth of 0.24mmThe maximum depth is 4mm and the Actual Depth is 4mmFilaments Used: PLA PolyLite Black Transmission Distance: 0.3 PLA PolyLite Steel Grey Transmission Distance: 1 PLA Hyper PLA White Transmission Distance: 9.2 (Canadian Filaments White PLA was used)This print uses 3 unique filamentsSwap Instructions: Start with Black At layer #12 (1.04mm) swap to Steel Grey At layer #24 (2mm) swap to White for the rest.