EINSTEIN HUEFORGE

IF YOU LIKE IT, LEAVE ME A LIKE AND A COMMENT WITH THE PHOTO OF THE PRINT, IT WOULD HELP ME A LOT TO KNOW IF YOU LIKE IT... It can be printed with any 3D printer. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm  The Model is 150.06x150.06mm in size  You may print at higher layer heights below the Min Depth of 0.48mm  The Max Depth is 2mm and the Actual Depth is 2mm Filaments Used: PLA Generic Recicled Black Transmission Distance: 0.3 PLA Generic Recicled Gris claro Transmission Distance: 1.5 PLA Generic Recicled White Transmission Distance: 5 PLA BambuLab Basic BambuLab Green Transmission Distance: 2 Swap Instructions: Start with Black At layer #6 (0.56mm) swap to Gris claro At layer #10 (0.88mm) swap to White At layer #14 (1.2mm) swap to BambuLab Green for the rest.