Electric Generator

This is a generator I built with my daughter for her 8th grade science fair. the design below will produce 12v AC.

----------------------------------
# parts list:
----------------------------------

2x bearings - 8x22x7mm: https://www.amazon.com/gp/product/B07V3NG2XR/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&th=1

28 gauge enameled copper wire: https://www.amazon.com/gp/product/B07DYF53ZN?th=1

32 magnets per rotor - 12 x 6 x 3mm: https://www.amazon.com/gp/product/B09L47HV7M

4x nuts - M3

4x bolts M3x12 up to M3x20 socket head screws

digital counter for the coil winding tool; https://www.amazon.com/gp/product/B08VRYFXQY



----------------------------------
# 3D printing steps:
----------------------------------
all parts were printed with PLA filament using a Prusa MK3S at 0.2mm layer height
i have included a coil rapping tool that you can use to make the coils

## CASE
**case base.stl**: printed no supports required 0.2mm layer height
**case lid.sti