elephant hueforge

Project: elephant savane.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 167.46x200mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 5.4mm and the Actual Depth is 2.4mmFilaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Yellow Transmission Distance: 6 PLA bambulad cyan Transmission Distance: 1.7 PLA+ Sunlu Grey Transmission Distance: 2 PLA BambuLab Matte Ice Blue Transmission Distance: 3.5 PLA BambuLab Basic Jade White Transmission Distance: 5 PLA BambuLab Matte Dark Brown Transmission Distance: 2 PLA+ Sunlu Silver Transmission Distance: 2 PLA BambuLab Basic Orange Transmission Distance: 7 pla esun cold white: 3This print uses 9 unique filamentsSwap Instructions: Start with Black At layer #8 (0.72mm) swap to Yellow At layer #10 (0.88mm) swap to cyan At layer #11 (0.96mm) swap to Black At layer #12 (1.04mm) swap to Grey At layer #13 (1.12mm) swap to Ice Blue At la